Carclin Premax MultiPlus
Carclin Premax MultiPlus is a strongly concentrated and widely applicable alkaline precleaner that efficiently removes contaminations caused by carbon, exhaust fumes, oil, and grease from trucks.
This powerful general pre cleaner is specifically suitable for removing stubborn road dirt from trucks, lorries, vans, buses, and other ‘heavy duty’ vehicles.
You can use this cleaning agent on all surfaces that are resistant to alkaline cleaning. Not just on heavy vehicles, but also for example on machines, parts, walls, and floors. You can safely and effectively use this product on metals, except for aluminium, zinc, and similar soft metals.
Carclin Premax MultiPlus is suitable for both high-pressure and low-pressure cleaning equipment and steam cleaners. This product is phosphate-free and suitable for medium hard water.
SDS
- EN 
SDS
- NL 
SDS
- ES 
SDS
- DE 
SDS
- FR 
SDS
- IT 
SDS
- SV 
SDS
- PT Extra information
- Low-pressure equipment: fill low-pressure tanks with water and Carclin Premax MultiPlus in a dosage of up to a maximum of 5%. Spray the diluted product.
- High-pressure equipment and steam cleaners: depending on the amount of contamination, set a final dilution between 0.5 and 5%.
- For both applications: after applying the diluted product, let it soak well (do not let it dry), then thoroughly rinse with clean water under pressure.
- Recommendation: first test on a less visible area.
- Product description: light yellow liquid
- Density: 1,095 g/cm³
Please read the label and the product information before use. You can find more safety information on the Safety Information Sheet Carclin Premax MultiPlus. For your personal protection, always take safety precautions when you use cleaning agents. Your supplier can give you more information. Immediately contact a doctor in case of emergency.
- Low-pressure equipment: fill low-pressure tanks with water and Carclin Premax MultiPlus in a dosage of up to a maximum of 5%. Spray the diluted product.
- High-pressure equipment and steam cleaners: depending on the amount of contamination, set a final dilution between 0.5 and 5%.
- For both applications: after applying the diluted product, let it soak well (do not let it dry), then thoroughly rinse with clean water under pressure.
- Recommendation: first test on a less visible area.
- Product description: light yellow liquid
- Density: 1,095 g/cm³
Please read the label and the product information before use. You can find more safety information on the Safety Information Sheet Carclin Premax MultiPlus. For your personal protection, always take safety precautions when you use cleaning agents. Your supplier can give you more information. Immediately contact a doctor in case of emergency.
